Cyberpunk Gifts: Essential Tech & Gear for the Neo-Futurist

For instant neon-soaked vibes, the Divoom LED Pixel Display’s 64×64 matrix throws big, bold pixel art, clocks, and counters that pop across a desk or wall. In our testing, the vivid LEDs and flexible stand/wall-mount options made it a great status board for streams, smart-home stats, or retro animations. Just note it needs constant mains power and can be picky about adapters—use a properly rated supply. We also encountered occasional app/firmware hiccups, so expect a little troubleshooting.

Nothing sells a neon future like color that flows, and the Hue Gradient Lightstrip nails it. In our testing, its smooth multi-color gradients and Hue Sync support created immersive ambient light behind monitors and TVs, while the Hue ecosystem integration proved rock-solid. You will need a Hue Bridge for full features, and it's pricier than many strips. Some setups leave a coverage gap under TVs and connectors/adhesive can be finicky, so plan your layout and add mounting channels if needed.

Level up a wall with the Govee Neon Rope Light 2, where app-based shape mapping makes custom neon lettering and cyberpunk icons surprisingly easy. In our testing, the softer material and upgraded bend clips helped clean curves, and Matter support slotted right into Alexa, Google, and Apple Home scenes. The trade-offs: the control box hangs off the power cord, which can be tricky to hide, and the silicone attracts dust. We also saw occasional connectivity/app quirks that required a quick reset.

Turn your battlestation into a neon artery with the Razer Chroma Light Strip Expansion Kit. During our review, the premium diffusing casing delivered a smooth, even glow from the 120 individually addressable LEDs across the three strips, and 3-pin 5V ARGB support made daisy-chaining simple. Just note you'll need a compatible controller (none is included), and flimsy adhesive and clips can require third-party mounts. Also watch hub port and power limits, which cap how many strips you can run on one channel.

Small desk, big control: the Stream Deck Mini gives you six customizable LCD keys for macros, scene switches, and neon-themed icons. In our testing, the dense, durable build felt ready for travel, and multi-action shortcuts plus folders helped stretch the limited button count. The software can be clumsy to set up and occasionally needs troubleshooting, and the keys lack the tactile snap of mechanical controls. Power users may outgrow it, but for compact rigs it's a slick command pad.

If you want a low-profile board with a blacked-out aesthetic that still feels premium, the NuPhy Air75 V3 BLACK nailed it for us. During our review, the thicker aluminum top and added damping delivered a creamy, muted sound, and the 4,000mAh battery easily stretched across weeks of mixed use. Hot‑swappable Gateron LP 3.0 switches make tuning feel effortless, but official switch options are lean at launch and the top-right knob can wobble and act inconsistently on some units. It’s also a bit heavier and pricier than the V2.

If you want cinematic synthwave on the go, the Arctis Nova Wireless delivers punchy, immersive audio with boosted bass. In our testing, the battery cruised through multiple days of gaming and the lightweight frame stayed comfortable for marathon sessions. The trade-offs: the mic can sound a bit tinny for pro streaming, and passive isolation is weak against engine rumble or busy cafes. We also found occasional driver mismatch affecting imaging on some units, so adjust EQ and test your pair early.

Need desktop-class punch in a tiny board? During our review, the Raspberry Pi 5’s CPU/GPU upgrade felt snappy for code compiles, emulation, and dual 4Kp60 dashboards, and the built‑in RTC plus soft power button add real convenience. It does run hot under load—active cooling is essentially mandatory—and the revised port layout means many Pi 4 cases won’t fit. Also note the 3.5mm jack is gone, so plan on USB audio or a HAT for analog outputs.

Looking to build a sleek, portable cyberdeck or wearable rig? The Adafruit Feather RP2040 shines with its compact Feather form factor, easy FeatherWing expansion, and a roomy 8MB QSPI flash—much more than a stock Pico—for hefty MicroPython scripts and assets. In our testing, the built‑in JST LiPo and 200mA charging made mobile projects painless, though only 21 GPIO means tighter pin budgeting versus a Pico’s 40. You’ll also need external I2C pull‑ups and a separate battery monitor if you want voltage readouts.

For cyberpunk tinkerers, the Arduino Uno R4 WiFi brings wireless built in: Wi-Fi and Bluetooth, plus a modern 32-bit Renesas MCU with far more SRAM and flash than the R3. During our testing, the USB-C port and Qwiic connector made sensor hookups painless and tidy. Expect some growing pains: older libraries or shields may need updates, and we encountered occasional USB upload hiccups. Wireless setup and firmware updates take extra steps, but the payoff is a compact, IoT-ready brain for your projects.

Automate your blackout drapes without shattering the silence: SwitchBot Curtain 3's QuietDrift mode is whisper-quiet in our testing. The stronger motor handled heavier fabrics than prior models, and the optional solar panel cuts down on manual recharging. Just know it relies on Bluetooth, so remote access and voice control typically require a SwitchBot Hub, and the bulkier body can be tricky to hide. In larger homes, our experience shows automations can get flaky without extra hubs to bolster connectivity.

A sleek way to secure your neon lair, the Yale Assure Lock 2 pairs clean design with straightforward installation. In our testing, HomeKit Bluetooth control was reliable and Siri responses were snappy, and the broad platform compatibility means you can expand connectivity later. Setup can be slow thanks to a buggy app, and some Google Home integrations feel inconsistent. Battery life varies by door and usage, our experience shows you'll want spare AAs handy and conservative auto-lock settings.

Think of the Aqara FP2 as motion sensing upgraded for a cyberpunk apartment: mmWave radar detects even a stationary person, enabling multi-person zoning and fall detection. During our review, those advanced automations felt transformative for lights and climate control. That said, we saw ghosting where it reported presence with no one there, and firmware updates occasionally failed, complicating pairing. Integrations like Google Home can lag or not refresh reliably, so for best results stick to the Aqara ecosystem and careful placement.

The Anker Prime Power Bank feels like a pocket reactor for your rig: 65W output fast-charges laptops and phones, and the built-in AC plug doubles it as a wall charger. In our testing, the compact, high power-density design slipped easily into a sling, though the 9,600mAh usable capacity means heavy users will recharge often. Some buyers report LCD or durability issues over time. You're paying a premium per mAh, but the convenience and speed are clutch for travel and events.

Cleaning algae shouldn't break your neon vibe, and the FL!PPER Float makes it feel downright sci-fi. In our testing, the two-sided design flips from scrubber to scraper effortlessly, and the rare-earth magnets cling tight even on thicker glass. If it detaches, the inner half floats to the surface for quick recovery, though some units don't always stay afloat. Strong magnets can be tricky to separate at first, and you'll want to budget for blade replacements every few months.